FTR Steering Stop Jam Nut Replacement – 19V-467 – 2018-2020 Isuzu FTR

June 18, 2019 NHTSA CAMPAIGN NUMBER: 19V467000

Steering Wheel Bolt May Break

If the vehicle’s turning radius is increased, there is an increased risk of a crash.

 

NHTSA Campaign Number: 19V467

Manufacturer Isuzu Technical Center of America, Inc.

Components STEERING

Potential Number of Units Affected 3,851

 

Summary

Isuzu Technical Center of America, Inc. (Isuzu) is recalling certain 2018-2020 FTR and Chevrolet 6500XD vehicles. The jam nut for the steering stopper bolt on the left front knuckle may loosen and allow the bolt to back away from the steering knuckle, increasing the turning radius of the vehicle in a left turn.

(more…)

U-Joint May Fail and Front Driveshaft may Detach – 2013-2018 Isuzu Reach

February 21, 2019 NHTSA CAMPAIGN NUMBER: 19V098000

U-Joint May Fail and Front Driveshaft may Detach

If the front driveshaft detaches from the vehicle, drive power will be lost, increasing the risk of a crash. The detached driveshaft may also create a road hazard, increasing the risk of a crash for following traffic.

 

NHTSA Campaign Number: 19V098

Manufacturer XL Hybrids INC

Components POWER TRAIN

Potential Number of Units Affected 94

 

Summary

XL Hybrids Inc. (XL) is recalling certain 2013-2018 Isuzu Reach vehicles modified to be equipped with XL’s electric hybrid system. The cardan (universal) joint on the front driveshaft may fail, possibly causing the front driveshaft to detach.

(more…)

V1803 – Cab Tilt Handle Orientation – 2018-2019 Isuzu FTR

NHTSA Campaign Number: 18V758
Manufacturer Isuzu Technical Center of America, Inc.
Components LATCHES/LOCKS/LINKAGES
Potential Number of Units Affected 2,076

 

Operator May Not Engage Cab Lock Lever

If the cab tilts forward while driving, it can increase the risk of a crash or injury.

 

Summary

Isuzu Technical Center of America, Inc. (Isuzu) is recalling certain 2018-2019 Chevrolet Low Cab Forward 6500XD and Isuzu FTR vehicles. The cab may not provide an adequate warning to lock the cab tilt-lock after servicing. If the cab tilt-lock is not engaged, the cab can tilt forward while driving.

(more…)

V1801 – Brake Switch may Detach – 2018 Isuzu NPR, 2019 Isuzu NPR-HD & NPR-XD

April 13, 2018 NHTSA CAMPAIGN NUMBER: 18V235000

Brake Switch may Detach

If the brake switch and nylon retainer are not properly secured, the switch can detach from the bracket causing the brake lights to illuminate whether or not brake pedal is depressed, the shift interlock will not operate and the accelerator pedal input will be disabled resulting in the inability to accelerate. These conditions can increase the risk of a crash.

 

NHTSA Campaign Number: 18V235

Manufacturer Isuzu Technical Center of America, Inc.

Components SERVICE BRAKES, HYDRAULIC

Potential Number of Units Affected 80

 

Summary

Isuzu Technical Center of America, Inc. (Isuzu) is recalling certain 2018 Isuzu NPR and 2019 Isuzu NPR-HD and NPR-XD vehicles. These vehicles have a brake switch and nylon retainer that may not have been properly secured into the steel brake pedal assembly bracket.

(more…)

V1705 – Kidde Fire Extinguisher – 2008 2011-2018 Isuzu Trucks

NHTSA Campaign Number: 17V726
Manufacturer Isuzu Technical Center of America, Inc.
Components EQUIPMENT
Potential Number of Units Affected 69,138

 

Fire Extinguisher May Be Clogged or Inoperable

In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.

 

Summary

Isuzu Technical Center of America, Inc. (Isuzu) is recalling certain 2011-2017 Isuzu NPR, 2008 NPR HD and NPR-HD Gas, 2011-2018 NPR HD and NRR, 2015-2018 NPR XD, 2012-2018 NQR, 2012-2017 NPR Gas and NPR-HD Gas, 2016-2017 Chevrolet Low Cab Forward 3500 HD, 3500 and 4500 and 2017-2018 Chevrolet Low Cab Forward 4500 HD, 4500 XD, 5500 HD and 5500 XD vehicles, equipped with certain Walter Kidde Plastic-Handle Fire Extinguishers, models FC10 and FC110. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or excessive force may be needed to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable.

(more…)